FujiFilm FLA-7000, Руководство по эксплуатации

Страница: 19 / 58

2006. Mar
15
1. Setting the Reading Conditions
Note:
When the number of scans is between 2 and 4, the laser name and
scan number are automatically added to the specified name.
000- 635- 1
File
name
Laser
name Scan
number
Example: If reading is set with the LD 635 nm laser, LD 473 nm
laser, LD 635 nm laser, and LD 635 nm laser, with "test"
as the file name, then the following files are created in the
"test" folder.
test-635-1
test-473
test-635-2
test-635-3
:
The comment is saved with the image as a file, and can be viewed
with the analyzing software. Input it if necessary.
: Scanning can be performed up to 4
times. The following items can be set.
Note:
: From the pull-down menu, select the Method
that corresponds with the sample. The
selected laser and filter combination is
displayed below.
: You may set the voltage to be applied to the
photo-multiplier tube (PMT) as an integral value
within the predetermined range. The larger the
value is, the higher the sensitivity.
Small
200V 1000V
Large
Value
Low High
Sensitivity
: Click the button to increase the number of scans,
and click the button to reduce the number of scans.
Up to 4 scans can be performed.