FujiFilm FinePix S20 Pro, Руководство пользователя

Страница: 16 / 120

１ ／ １ ／ ２００ １ ／ １ ／ ２００４
１２ ： ００ ＡＭ １２ ： ００ ＡＭ
ＳＥＴ ＳＥＴ ＣＡＮＣＥＬ ＣＡＮＣＥＬ ＯＫ ＯＫ BACK BACK
ＤＡＴＥ ＴＩＭＥ ＤＡＴＥ ＴＩＭＥ
ＭＭ ＤＤ ＹＹＹＹ Ｍ ＤＤ ＹＹＹＹ
／ ／ ／
16
2
3
4
ＳＥＴ ＳＥＴ ＮＯ ＮＯ ＯＫ ＯＫ BACK BACK
ＤＡＴＥ ＤＡＴＥ ＴＩＭＥ ＮＯＴ ＳＥＴ ＴＩＭＥ ＮＯＴ ＳＥＴ
２ ／ ／ １０ １０ ／ ２００ ／ ２００４
１２ ： ００ ＡＭ １２ ： ００ ＡＭ
ＤＡＴＥ ＴＩＭＥ ＤＡＴＥ ＴＩＭＥ
ＳＥＴ ＳＥＴ ＣＡＮＣＥＬ ＣＡＮＣＥＬ ＯＫ ＯＫ BACK BACK
ＭＭ ＤＤ ＹＹＹＹ ＭＭ ＤＤ ＹＹＹＹ
0 1 0 2
TURNING ON AND OFF / SETTING THE DATE AND TIME
After purchasing the camera, first time when you
turn camera on, the date and time are cleared.
Press the “MENU/OK” button to set the date and
time.
1 Press “ d ” or “ c ” to select Year, Month, Day,
Hour or Minute.
2
Press “
a
” or “
b
” to correct the setting.
Once you have set the date and time, press the
“MENU/OK” button. Pressing the “MENU/OK”
button changes the camera to Photography or
Playback mode.
1
To turn the camera on, set the Power switch to “
q
”
or “
w
”. When turning the camera on, the indicator
lamp lights green.
To turn the camera off, set the Power switch to
“OFF”.
The lens moves when the camera is in “
q
” mode.
Take care not to obstruct the lens as it is a
precision component.
Obstructing the lens will cause damage and the
“
ß
” or “
∂
” message will
appear. Take care also not to get fingerprints on
the camera lens as this will result in impaired image
quality in your shots.
●
!
If the message (see figure at left) does not appear, refer to
“Correcting the date and time” (
➡
P.17) and check and correct
the date and time settings.
●
!
The message is also shown when the camera battery has
been removed and the camera has been left in storage for a
long period of time.
●
!
To set the date and time later, press the “BACK” button.
●
!
If you do not set the date and time, this message will appear
each time you turn the camera on.
●
!
Holding down “ a ” or “ b ” changes the numbers continuously.
●
!
When the time displayed passes “12:00”, the AM/PM setting
changes.
●
!
At the time of purchase and after leaving the camera for a
long period with the batteries removed, settings such as the
date and time are cleared. Once the AC power adapter has
been connected or the batteries have been fitted for 2 hours
or more, the camera settings will be retained for roughly 24
hours even if both sources of camera power are removed.