24
TAKING PICTURES (AUTO MODE)
STILL PHOTOGRAPHY MODE
4
Brace your elbows against your sides and hold the
camera with both hands. Position the thumb of your
right hand so that it is handy for using the zoom.
●
!
The image will be blurred if the camera moves when taking
the picture (camera shake). Use a tripod to avoid camera
shake, particularly for shots in dark locations when the flash
is set to Suppressed flash mode.
●
!
There may be some uneven brightness at the lower edge of
the LCD monitor. This is normal and does not affect the
image.
Take care to hold the camera so that your fingers
or the strap do not cover the lens, flash or flash
control sensor. If the lens, flash or flash control
sensor is blocked by your fingers or the camera
strap, you may not get the correct brightness
(exposure) for your shot.
5
●
!
Check that the lens is clean. If it is dirty, clean the lens as
informed on P.107.
◆
Using the FZ ring to adjust the zoom
◆
When the Focusing mode is set to S-AF or C-AF, the
FZ ring can be used instead of the Zoom button to
change the zoom setting.
Turn the FZ ring clockwise to zoom in and
counterclockwise to zoom out. A “zoom bar” appears
on the screen during zooming.
telephoto
wide-
angle
FZ ring
To zoom in on your subject, press “
T
” (telephoto)
button. To widen the angle of your shot, press “
W
”
(wide-angle) button. At that same time, the “zoom
bar” appears on the screen.
h
Optical zoom focal length (35 mm camera
equivalent)
Approx. 35 mm-210 mm
Max. zoom scale: 6
×
6
AUTO
AUTO 250
250 F5.6
33
33
Zoom bar
●
!
Zooming pauses briefly when it changes between optical
zoom and digital zoom (
➡
P.28). Press the same Zoom button
again to change Zoom modes.