FujiFilm FinePix S20 Pro Скачать руководство пользователя страница 14

Страница: 14 / 120

●

Insert only the appropriate media types into the

xD-Picture Card

and Microdrive slots. Inserting the incorrect media

will damage the camera or media.

●

If the media is oriented incorrectly, it will not go all the way into the slot. Do not apply excessive force when inserting
an

xD-Picture Card

or Microdrive.

●

If the media is not fully inserted into the slot, the “

” message appears.

Gold marking

Align the gold marking on the xD-Picture
Card slot with the gold contact area on
the

xD-Picture Card

and push the card

firmly all the way into the slot.

Push the Microdrive firmly all the way into
the Microdrive slot.

xD-Picture Card

Microdrive

Close the slot cover.

Use either

xD-Picture Card

or Microdrive as recording media in the FinePix S20 Pro.

If an

xD-Picture Card

and a Microdrive are inserted at the same time, images will be recorded

onto the media selected as the “MEDIA” (

➡

P.83).

Data cannot be copied between the two media types on the FinePix S20 Pro.

Set the Power switch to “OFF”, check that the
indicator lamp is off and then open the slot cover.

●

If opening the slot cover while the camera is still on, the
camera will turn off.

INSERTING THE MEDIA

Do not open the slot cover while the camera is still
turned on. This could damage the media or corrupt
the image files on the media.

Содержание FinePix S20 Pro

























































































































Результаты поиска

Содержание FinePix S20 Pro

Отзывы:

Похожие инструкции для FinePix S20 Pro

Бренды по названию

Популярные бренды

FujiFilm FinePix S20 Pro, Руководство пользователя

Результаты поиска

Содержание FinePix S20 Pro

Отзывы:

Похожие инструкции для FinePix S20 Pro

Бренды по названию

Популярные бренды