background image

Please register your camera at 

www.MoultrieFeeders.com/warranty 

to activate your warranty.

X-SERIES CELLULAR GAME CAMERA INSTRUCTION MANUAL

Table of Contents

Account Set Up .........2
Install Batteries ........3
Install SD Card ..........4
Format SD card ........5
LED Color Chart. ... 6-7
Test Image ................8
Camera Settings .......9
Update Firmware ....10
Mount Camera ........11

IMPORTANT! READ BEFORE YOU START:

• We recommend that you go through the entire set up process 

   at home to ensure your camera is operating as expected and 

   images are transmitting prior to taking to the field for use.
• You must have an 

ACTIVE

 Moultrie Mobile account to operate 

   camera and retrieve images. Log on to 

MoultrieMobile.com

 

   to set up an account or use the free Moultrie Mobile app.
   Plan purchased from Moultrie at time of activation.
• 12 AA batteries and a compatible SD card are required;

   we recommend an 8GB or smaller Class 10 SD card. 

   NOTE: See page 3 for important battery information. 
• Each time you insert an SD card, be sure to format the SD card 

   in your camera to ensure it will work properly. See page 5 for

   instructions on how to format SD card.
• 4G Network Coverage is required. Go to 

MoultrieMobile.com

 

   to verify coverage in your location.

Содержание X Series













Отзывы: