FujiFilm DR-ID 670, Руководство по эксплуатации

Страница: 8 / 62

1-2
For Safe Operation
1
DR-ID 670 Operation Manual 897N102735
WARNING
Do not use the equipment in a location where metal particles could come into the equipment.
This may cause an electric shock.
WARNING
Do not disassemble or remodel the equipment. Otherwise, fire or electric shock may result.
Keep away from the parts inside the product, which may cause electric shock. If you touch
them accidentally, death or severe injury may result.
WARNING
Do not hit or drop the equipment or subject it to severe shock. Otherwise, the equipment may
be damaged. If the damaged equipment is used, fire or electric shock may result.
WARNING
Before using the flat panel sensor (DR-ID 601SE, DR-ID 602SE, DR-ID 611SE, DR-ID 612SE and DR-ID
613SE), make sure that the battery cover or battery pack is attached. If not attached, an electric shock
may result.
WARNING
Make sure to use the optional parts and accessories recommended by us. Failure to use the
optional parts and accessories recommended by us may result in damage to the equipment
and/or electric shock and injury.
CAUTIONS
As the cables of the equipment are long, be careful not to entangle the cables during use.
Also, be careful not to trip over the cables. Falls could result in injury.
CAUTIONS
Follow the specified procedure when turning off the equipment. Otherwise, the flat panel
sensor could be damaged by thermal shock.
CAUTIONS
Do not store magnetic media near the DR system and control cabinet. Otherwise, magnetism
generated by the equipment may cause the data to be lost.
CAUTIONS
Keep the equipment away from patient’s body fluids, chemicals, water, etc.
Otherwise, it may become damaged, causing fire or electric shock.
If necessary, protect the flat panel sensor by covering it with a disposable bag.
Explosion Warnings
WARNING
Because this equipment is not explosion-proof, do not use combustible and explosive gases
near the equipment.