FujiFilm DR-ID 670, Руководство по эксплуатации

Страница: 36 / 62

3-4
Basic Operation
3
DR-ID 670 Operation Manual 897N102735
[1] Upright type
When inserting from the right-hand side
CAUTIONS
When inserting the flat panel sensor into
the radiographic examination stand, direct
the exposure plane toward the X-ray tube.
1
Pull out the tray.
Tray
2
Insert the flat panel sensor into the cassette
receive while the connector directed to the
upper right, and then move it downwards.
Connector
Cassette receive
3
Set the flat panel sensor to the upper part of
the tray.
4
Push the tray back into place after setting
the flat panel sensor.
When inserting the flat panel sensor from the left-
hand side, direct the connector to the lower left.
Connector
5
Remove the flat panel sensor after use.
Pull out the tray, push the cassette receive
downwards, and then remove the flat panel sensor.
Push the tray back into place.