FujiFilm DR-ID 670, Руководство по эксплуатации

Страница: 39 / 62

3-7
Basic Operation
3
DR-ID 670 Operation Manual 897N102735
3.1.7 Installing/Removing the Battery Pack (Optional) for the
Flat Panel Sensor
Follow the procedure below to install/remove the battery pack (optional) for the flat panel sensor.
When installing/removing the battery pack, place the flat panel sensor on a flat place.
1
Remove the battery cover.
Place the flat panel sensor with the back side facing
upward, and then simultaneously slide both the
battery lock release latches outward to remove the
battery cover.
Battery cover
2
Install the battery pack.
Make sure that the battery lock release latches are
released.
When the battery lock release latches are
released
Battery lock release latches
Slide the battery pack along the dent of the battery
section of the flat panel sensor toward the connector
terminal. Align the guide mark of the battery pack
with that of the flat panel sensor, and push the
battery pack in to install it.
Make sure that battery pack is securely installed.
Pushing the battery pack in with the guide marks
misaligned may damage the connector terminal.
When the battery pack is installed, the power is
automatically turned on.
Battery pack
Guide marks
• To remove the battery pack, perform the same
procedure as Step
1
(removing the battery cover).
• To install the battery cover, perform the same
procedure as Step
2
(installing the battery pack)