FujiFilm ALPHA 5 RYT-SX, Руководство пользователя

Страница: 359 / 547

CHAPTER 6 KEYPAD
Positioning Data Edit Mode
6-31
6
(4) Stand still timer
Set the stop time after the motor has reached the target position. The setting value range is from
0.00 to 655.35 [s] in increments of 0.01.
After the stop time has elapsed, the sequence output signal (in-position signal [INP]) turns on.
The decimal point position can be changed in the parameter PA2-42 (timer data decimal point
position).
(5) M code
The M code output by executing positioning data can be edited. The setting range is from 00 to FF
in hexadecimal. The minimum increment is 1.
The default value is FF.
SET
(1 sec. or over)
SET
(1 sec. or over)
SET
(1 sec. or over)
ESC ESC
ESC
SET
(1 sec. or over)
ESC
SET
(1 sec. or over)
ESC
SET
(1 sec. or over)
ESC