4.2 Description of Menu Items
59
Basic Settings
[Basic Settings] menu is used to make the printer operation settings such as for alarm and
power saver mode.
Item
Description
Power Saver
Specifies whether to enable the transition to power saver mode 2 or not. Select
[Disable] to disable the setting.
• [Mode 2] (default: [Enable])
PowerSaver Time
Specifies the transitional time to power saver mode.
• [Mode 1] (default: [3 min])
Specify the transitional time to power saver mode 1 between 1 and 120 minutes in
increments of 1 minute. After the specified period of time has passed from the last
print job, the printer enters power saver mode 1.
• [Mode 2] (default: [5 min])
Specify the transitional time to power saver mode 2 between 5 and 120 minutes in
increments of 1 minute. After the specified period of time has passed from entering
power saver mode 1, the printer enters power saver mode 2.
Note
• When [Power Saver] is set to [Disable] (default: [Enable]), the printer does not shift to
power saver mode 2.
Refer to
• Power saver mode: “1.3 Power Saver Modes” (P. 17)
• Procedures to set the transitional time: “Basic Operations (Example: Changing the
Low Power Mode Settings)” (P. 53)
Alert Tone
Specifies whether to turn on the alarm when an error occurs in the printer. The default is
[On]. You cannot adjust the sound volume.
Time-Out
Specifies the amount of time the printer waits to receive additional bytes of data from
the computer. When this timeout expires, the print job is canceled.
• [5 sec.] to [300 sec.] (default: [30 sec.])
Specifies the amount of time in increments of 1 second the printer waits for additional
data before it cancels the job.
• [Off]
Disables the job timeout setting.
Auto Log Print
Specifies whether to automatically print information about the printed data that has
been processed in the printer ([Job History]).
• [Off] (default)
Select this if you do not want to print the [Job History] automatically even if the
number of print jobs exceeds 22.
• [On]
Automatically prints a report when the number of print jobs reaches 22.
Note
• You cannot set this during printing.
• You can print the [Job History] from the [Report/List] menu.
• You need to restart the printer to activate the new settings. After making the settings,
turn off the printer and then turn it on again.
ID Print
Select this to print the user ID on a specified position.
• [Off] (default)
User ID is not printed.
• [Top Left]
Prints the user ID on the top left of the sheet of paper.
• [Top Right]
Prints the user ID on the top right of the sheet of paper.
• [Bottom Left]
Prints the user ID on the bottom left of the sheet of paper.
• [Bottom Right]
Prints the user ID on the bottom right of the sheet of paper.
