manualshive.com logo in svg

Fuji Xerox ApeosPort-VII C5588, Быстрая справка

Поделиться
Скачать
Fuji Xerox ApeosPort-VII C5588 Скачать руководство пользователя страница 240

7  Problem Solving

240

Image Quality Trouble

If the image quality of printed documents is poor, identify the symptom in the following 
table to perform the remedy.
If image quality does not improve even after performing the remedy, contact our Customer 
Support Center.

Symptom

Cause

Remedy

The copy is dirty.

Is the document glass or the 
document cover dirty?

Clean the document glass and the document 
cover.

Is the document a 
transparent type such as a 
transparency film?

If the document is transparent, dirt on the 
document cover will be copied. Place a white 
sheet of paper on top of the document when 
copying.

Is the document colored, 
rough, or a blueprint?

Adjust the copy density or image quality.

Is the document glossy 
printing paper?

Glossy printing paper easily sticks to the 
document glass, and shadows are sometimes 
copied, soiling the image. Place a 
transparency film under the document when 
copying.

The copy has 
black lines.

Is the constant velocity 
transport glass on the 
document feeder dirty?

Clean the constant velocity transport glass.

The copy is too 
dark.

Is the copy density set to 
[Darken]?

Adjust the copy density.

The copy is too 
light.

Is the document faint?

Is the copy density set to 
[Lighten]?

The copy is 
slightly 
misaligned.

Are the paper edges aligned 
and the leading edge 
adjusted to the tray corners?

Align the paper edges, adjust them to the 
tray's top corners, and reload the paper.

The copy is 
misaligned or 
skewed.

Is the document loaded 
correctly?

Load the document correctly.

Reference

z

Refer to "Loading Documents" (P.94).

Is the paper loaded correctly 
in the tray?

Load the paper correctly.

Reference

z

Refer to "Loading Paper" (P.61).

Are the paper guides of Tray 5 
correctly aligned to the 
paper?

Load the paper correctly and align the 
document guides to the document edges.

Reference

z

Refer to "Loading Paper in Tray 5" (P.67).

Are the document guides on 
the document feeder set in 
the correct positions?

Load the document correctly, and align the 
document guides to the document edges.

Reference

z

Refer to "Loading Documents" (P.94).

Содержание ApeosPort-VII C5588
























































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды