Page
2
of
42
Fuji Electric Europe GmbH
Version
Changes applied
Date
Written
Checked
Approved
0.1.0
Draft
10.05.2007
W. Zinke
W. Zinke
W. Zinke
1.0.0
1
st
Release
15.08.2007
A. Schader
A. Schader
A. Schader
1.0.1
Spelling corrections
16.08.2007
A. Schader
A. Schader
A. Schader
1.0.2
Recommendations according to Lutz
20.08.2007
A. Schader
A. Schader
A. Schader
1.0.3
Added cover mounting / dismounting
20.08.2007
A. Schader
A. Schader
A. Schader
1.0.4
Recover the lift
20.08.2007
A. Schader
A. Schader
A. Schader
1.0.5
Update for 4.0, 37 and 45 kW
24.10.2007
A. Schader
A. Schader
A. Schader
1.0.6
Update 2 for 4.0, 37 and 45 kW
31.10.2007
A. Schader
A. Schader
A. Schader
1.1.0
First English version
20.11.2007
D. Bedford
D. Bedford
D. Bedford
1.2.0
Spelling corrections
Most important functions in I/O terminal functions are added
in table 16
200 V technical data added
De-rating and over-rating added
21.02.2007
J. Alonso
D. Bedford
D. Bedford
1.2.1
Layout changes applied
27.02.2008
A. Schader
D. Bedford
D. Bedford
1.2.2
OS formula corrected
28.03.2008
J. Alonso
D. Bedford
D. Bedford
1.2.3
Caution adde
d in chapter “conformity to European
standards”
07.04.2008
J. Alonso
D. Bedford
D. Bedford
1.3.0
“Maximum braking time” changed.
“Binary combination for speed selection” example modified.
“Signal timing diagram for travel using intermediate speeds”
updated.
“Correspondence of functions for each phase of the
sequence” table updated and general table added.
H64, H65 & L74 added in start & stop optimization table.
Figure 26 modified.
Rescue operation information modified.
Alarm codes updated.
14.07.2008
J. Alonso
J. Català
J. Català
1.3.1
L56 added to travel optimization table
Figures 8, 9, 10 and 11 modified slightly
Some information added to parameter F03
15.07.2008
J. Català
J. Català
J. Català
1.3.2
Specification tables revised
Figure on page 11, 12, 18, 19, 20 and 22, slightly modified
H67 definition improved on page 33
L56 definition added on page 39
16.07.2008
J. Català
J. Català
J. Català
1.3.3
Figure 23 modified
Table 11 modified
Title changed and text added on page 39 (soft start function)
Alarm messages table modified
Tables numbers corrected
Small text corrections
16.07.2008
J. Alonso
D. Bedford
D. Bedford
1.4.0
No-load current calculation formula is added
Table 12 is updated
Function L83 is added and a value is specified in functions
F20 and F25 in table 11.4
Chapter numbers are included
Small text corrections
25.11.2008
J. Alonso
D. Bedford
D. Bedford
1.5.0
ROM version is included
CE declaration is updated
EN954-1 Cat 3 is included
2,2kW -7 is included
Specifications and over-rating changed
Figure 26 is changed
Some text is added or modified
25.01.2010
J. Alonso
D. Bedford
D. Bedford
1.6.0
ROM version updated
L07, H98(bit2) and L99(bit6) functions included
Some text is added or modified
Specifications modified
24.12.2010
J. Alonso
D. Bedford
D. Bedford
1.6.1
Figure numbers are restructured
Figure 4 is modified
Chapter 3.1 is corrected
28.02.2011
J. Alonso
D. Bedford
D. Bedford
1.6.2
Information at 15 kHz of switching frequency is added in
chapter 3.3
OPL trip is included in chapter 17
Definition of parameters F03 and F04 is changed in chapters
11.2, 11.3 and 11.4
F09 is added in chapter 11.4
Some text is modified
Format of tables is changed and restructured
12.03.2011
J. Alonso
D. Bedford
D. Bedford
1.7.0
EN1 and EN2 terminals included
Safety standards updated
Mistake corrected in figure 11
Firmware version updated
ASR PI included on figure 29
04.01.2012
J. Alonso
D. Bedford
D. Bedford
1.7.1
Some information is added in Chapter 3 (safety standards)
Some values updated in table 1
Some trips are included in chapter 17
Logo is updated
12.07.2012
J. Alonso
J. Català
J. Català
1.8.0
Modifications regarding L80, H04. L76 added.
Some text is modified in chapter 3.1, 3.2 and 15
20.05.2014
J. Alonso
J. Català
J. Català
Dedicated to Mr. Wilfred Zinke
We would like to thank you for your valuable support and assistance in creating this Starting Guide, we are very grateful that you
dedicated your time for this.
