Fuji Electric BUC S-69D Скачать руководство пользователя страница 5

Страница: 5 / 39



Safety precautions

Read this manual thoroughly before proceeding with installation, connections (wiring), operation, or maintenance and
inspection. Ensure you have sound knowledge of the device and familiarize yourself with all safety information and
precautions before proceeding to operate the inverter.
Safety precautions are classified into the following two categories in this manual.

Failure to heed the information indicated by this symbol may lead to dangerous conditions,

possibly resulting in death or serious bodily injuries.

Failure to heed the information indicated by this symbol may lead to dangerous conditions,

possibly resulting in minor or light bodily injuries and/or substantial property damage.

Failure to heed the information contained under the CAUTION title can also result in serious consequences. These safety

precautions are of utmost importance and must be observed at all times.

Application

• This product is designed to discharge the braking power to a resistor in a braking operation of the Fuji's inverter for

general industry. It cannot be used for others.

Fire or an accident could occur.

• The dynamic braking unit may not be used for a life-support system or other purposes directly related to the human

safety.

• Though the dynamic braking unit is manufactured under strict quality control, install safety devices for applications

where serious accidents or property damages are foreseen in relation to the failure of it.

An accident could occur.

Installation

• Install the dynamic braking unit on a base made of metal or other non-flammable material.

Otherwise, a fire could occur.

• Do not place flammable object nearby.

Doing so could cause fire.

• The dynamic braking unit whose protective structure is IP00 involves a possibility that a human body may touch the

live conductors of the main circuit terminal block. Install the dynamic braking unit in an inaccessible place.

Otherwise, electric shock or injuries could occur.

• Do not support the dynamic braking unit by its front cover during transportation.

Doing so could cause a drop of the inverter and injuries.

• Prevent lint, paper fibers, sawdust, dust, metallic chips, or other foreign materials from getting into the dynamic

braking unit or from accumulating on the heat sink.

• When installing the dynamic braking unit, use screws and bolts specified in the installation procedure and tighten

them with the specified tightening torque.

Otherwise, a fire or an accident might result.

• Do not install or run an dynamic braking unit that is damaged or lacking parts.

Doing so could cause fire, an accident or injuries.

iii

Содержание BUC S-69D








































Результаты поиска

Содержание BUC S-69D

Отзывы:

Похожие инструкции для BUC S-69D

Бренды по названию

Популярные бренды

Fuji Electric BUC S-69D, Инструкция по эксплуатации

Результаты поиска

Содержание BUC S-69D

Отзывы:

Похожие инструкции для BUC S-69D

Бренды по названию

Популярные бренды