Fuji Electric BUC S-69D, Инструкция по эксплуатации

Страница: 25 / 39

The wiring route for DC fuse blowout detection is shown in Figure 2.2-8.
On the printed circuit boards, aluminum electrolytic capacitors, high-voltage circuits, and heat sinks for cooling electronic
devices are mounted. To prevent the wires from coming into contact with those components, be sure to secure the wires to the
cable tie fixtures using cable ties. Otherwise, those components in contact with the wires may come off due to vibration.
In wiring, take care not to stretch the wires too tight.
Connection terminal for
fuse blowout detection
Wiring route
Cable tie fixtures
Rank 4
Figure 2.2-8 Wiring Route for DC Fuse Blowout Detection
17