15
EN
Overview
The FT Input Expander is a module that has 24 input channels, separated in 20 digital and analog inputs (0-5V) used for reading temperature,
pressure, button or switch positions and 4 differential inputs for magnetic or hall effect sensors used for reading frequencies such as wheel
speed, gearbox and driveshaft RPM, fuel flow sensors, among others. All the readings are sent via the FTCAN 2.0 network to be stored in
the internal memory of your Power FT ECU and displayed in its datalogger (the FT Input Expander has no internal memory).
With the FT Input Expander your project is even more complete, it is totally compatible with other products of the Power FT lineup, and
communication is completely performed via CAN network.
Warranty terms
The use of this equipment implies the total accordance with the terms described in this manual and exempts the manufacturer from any
responsibility regarding to product misuse.
Read all the information in this manual before starting the product installation.
NOTE
This product must be installed and tuned by specialized auto shops and/or personnel with experience on engine preparation
and tuning.
Before starting any electric installation, disconnect the battery.
The inobservance of any of the warnings or precautions described in this manual might cause engine damage and lead to the invalidation
of this product warranty. The improper adjustment of the product might cause engine damage.
This product does not have a certification for the use on aircrafts or any flying devices, as it has not been designed for such use purpose.
In some countries where an annual inspection of vehicles is enforced, no modification in the original fuel injection system is permitted. Be
informed about local laws and regulations prior to the product installation.
