700- LT1-Man Rev2 22 Oct 2018
Page 1/22
DESCRIPTION
Chapter 1
1.1
GENERAL
This guide is meant as a ready reference to set up an LT1 System. Details of all aspects of
station operation can be found on the FTS Support website (http://support.ftsinc.com/) in
the following manuals:
• LT1 (Cell/GOES) Operator’s Manual (700-LT1-Man)
• FTS360 and FTS360 Config App (FCA) User Manual (700-FTS360-Man)
LT1-Cell and LT1-GOES systems are set up exactly the same, with the exception of the
placement of the telemetry antennas. LT1-Cell systems come equipped with a dual
cellular/GPS antenna which is mounted internally; LT1-GOES systems require an externally
mounted satellite antenna and the GPS antenna can be mounted either internally or
externally.
1.2
SYSTEM COMPONENTS
The LT1 System Kits consist of all the required components to mount an LT1 station on an
existing 2” diameter pole assembly. The system will have the specific LT1 Bundle for your
order, depending if it is an LT1- Cell or an LT1-GOES. Prior to assembling, examine the
shipment and confirm all the parts arrived and are undamaged.
LT1-CELL-BNDL/LT1-CELL-VZ-BND
ITEM
PART #
LT1- CELL or LT1-CELL-VZ complete with:
•
4 pin power terminal block
•
8 pin data terminal block
•
4 GB SD Card (inserted)
•
Slot Screwdriver
•
Integrated Cellular/GPS antenna
LT1-4PIN
LT1-8PIN
19100
19367
18682
OPTIONAL
: SIM card (inserted) with purchase of FTS cellular plan
LT1-GOES-BNDL/LT1-GOES-GPS-BNDL
LT1-GOES complete with:
•
4 pin power terminal block
•
8 pin data terminal block
•
4 GB SD Card (inserted)
•
Slot screwdriver
•
SMA to N adapter*
•
SMA plug to SMA jack cable
•
SMA plug to N plug cable
•
GPS antenna (LT1-GOES-GPS-BNDL only)
LT1-4PIN
LT1-8PIN
19100
19637
20180
19930
19931
GPS-ANTENNA-WP
* Not required if using part# 19931 with integrated SMA to N adaptor
