700- LT1-SYS-IG Rev 2 22 Oct 2018
Page 11/22
3)
Connect the leads from the solar panel to the regulator as follows:
4)
Connect the LT1 Regulator to battery cable assembly (part # 19466) to the solar
regulator as follows:
5)
Mount the solar regulator onto the DIN rail beside the the LT1 and secure the battery in
position using the red Velcro strap.
HINT:
To attach and release the solar regulator,
slide a small screwdriver into the bottom latch
to unlock and lever up or down accordingly.
STEP 2: CONNECT POWER
1)
Connect the LT1 Regulator to battery cable assembly (part # 19466) to the battery as
follows:
WARNING!
Damage to the regulator can result if you do not connect
these wires in the correct order or with the proper polarity!
Release
Attach
Unlock
Black wire (-) to terminal 7 (GND)
Red wire (+) to terminal 9 (BAT)
To battery
Black wire to terminal 10 (GND)
Clear wire to terminal 11 or12
