700- LT1-SYS-IG Rev 2 22 Oct 2018
Page 15/22
CONFIGURING WITH THE FTS360 CONFIG APP
Chapter 3
Detailed information on FTS360 and the FTS360 Config App can be found in the FTS360
User Manual (700-FTS360-Man)
3.1
CONFIGURING SENSORS
Once connected to the LT1 and powered, use the FTS360 Config App to add and configure
the sensor for the station.
1) Connect to Station
•
Open the FTS360 Config App. It should automatically discover the Station. If the
station is not discovered, press the “Scan” bar.
The first time a station is connected to the FTS360 Config App, it’s identified by its serial
number. Any configuration which happens in the field will be saved to that station.
Once synchronization happens, the station’s name can be changed from the serial
number to a user friendly name using the station edit function in FTS360 or the FTS360
Config App.
•
Select “Connect” to display the Station Dashboard (the BLE Status light on the LT1 will
become solid “On” when connectivity established). If there are several stations
discovered, ensure you connect to the correct one.
HINT: If there is more than one LT1 station in the area, once connected,
select the Flash LEDs bar to confirm you are connected to the desired
station.
