700- LT1-SYS-IG Rev 2 22 Oct 2018
Page 16/22
2). Add and configure sensors:
Select the sensor type to add (NMEA or Rain). To add an
SDI-12 sensor, select the Add Sensor bar.
3). Test the sensor(s):
Select the Test Sensor bar. This will trigger a reading by the sensor
and the data point(s) will display.
NOTE:
New sensors should always be tested prior to leaving the site to ensure they
are operating as desired.
This will indicate GOES or
Cellular as per the LT1 type
It can take up to 20
minutes to get a GPS fix
Select the desired
sensor from the Sensor
Type drop down list and
edit fields as necessary.
Save.
HINT:
Custom library items created
by your agency are listed first,
followed by default library items.
Use the Search feature to find a
specific entry or to filter the items by
sensor type
