FTS Bubbler, Инструкция по установке и быстрому запуску

Страница: 15 / 16

COMMAND DEFINITION COMMENTS
aXSP P !
Get/set period
for samples in
seconds
Range: 2-60
The stage value is an average of the number of
samples taken over the specified sample period
(averaging duration). Each sample takes
approximately 2 seconds.
aXSU P !
Get/Set stage
units
0 = ft (feet) (slope=2.307)
1 = in (inches) (slope=27.680)
2 = m (meters) (slope=07.03)
3 = cm (centimeters)
(slope=70.3250)
4 = mm (millimeters) (slope=703.250)
5 = cu (Custom Units)*
* Indicates a slope was manually set using the
‘aXSLP!’ command. The user must be aware of
the units associated with the input slope value.
aXTU P ! Get/set
temperature
units
6 = Fahrenheit
7 = Celsius
13