X-COMMANDS
For Get commands the optional
P
( or other italicized indicator) is not required;
for Set commands, the
P
must be replaced with the desired parameter
numeral(s) or characters.
COMMAND
DEFINITION
COMMENTS
aXBLD!
Begin tank
bleed
aXBLD
P
!
End tank bleed
P
=E
Bubbler needs to be power cycled after this
command to return to normal operations.
aXBR
P
!
Get/set bubble
rate per minute
Range: 30-120
aXBVI
P.p
!
Get/set battery
voltage idle
P.p
is the minimum voltage that will trigger a
voltage fault.
Default = 10.8.
aXBVL
P.p
!
Get/set battery
voltage low
P.p
is the minimum voltage that will trigger a
battery fault,
Default = 8.0
aXDOM!
Get date of
manufacture
Format is: YYYYMMDD
aXDT
YYYYMMDD,
HHMMSS
!
Get/Set date
and time
Format is: YYYYMMDD,HHMMSS
aXFSN!
Get serial
number
Returns the Datalogger’s serial number
aXI!
Get firmware
version and
build date
Format: version number, YYYY-MM-DD
HH:MM:SS UTC
Example: 1.0.65,2017-06-21 17:19:29 UTC
aXID
P
!
Get/set site ID
Maximum 10 characters.
Symbols are not supported on the Bubbler’s
display.
aXIMIN
P
!
Get/set 4-20 mA
minimum
Default = 0.0
aXIMAX
P
!
Get/set 4-20 mA
maximum
Default = 0.0
The minimum and
maximum values must
differ by 0.2 psi (6
inches). Stored in psi.
11
