fSONA Sonabeam E Series, Руководство по установке

Страница: 45 / 87

Installing Your SONAbeam Terminal
wireless at the speed of light
…………….
35
S
O
N
A
b
e
a
m
E
-S
e
ri
e
s
In
st
a
lla
ti
o
n
M
a
n
u
a
l
2. Carefully remove the cover and let it hang from the optical head on the attached
tether cable.
WARNING!
The SONAbeam Customer Interface Compartment includes a special gasket for
weatherproofing and EMI control. DO NOT damage this gasket!
While the installer provides the 1” interface conduit – Electroflex EMSP-13, or
equivalent, is recommended – the conduit hardware to provide a mating interface to the
terminal’s conduit entrance is included in the terminal’s Installation Kit.
To affix the Customer Conduit:
1. Temporarily route your Liquid-Tight flexible conduit from your Customer
Interface Box to the conduit entrance on the optical head in order to ascertain the
appropriate length to join the two…
WARNING!
Be sure to provide sufficient slack to allow movement of the optical head for
alignment!
NOTE…
The age-old adage: “Measure twice, cut once…” is very appropriate for this
operation…
2. Mark and cut the conduit end, using a fine-tooth hacksaw or other appropriate
tool…
Ferrule
Nylon Seal
Retaining
Nut
Liquid-Tight
Conduit