FrontLine FLO-3BL, Инструкция по использованию и уходу

Страница: 31 / 32

31
• Check your igniter battery and replace if needed.
• Check for loose wire connections to the igniter or electrodes.
• Check to see if debris is blocking the electrodes.
• If the igniter is not working, can you light the grill with a lighter?
Flare-ups • Check flame tamers and cooking grates for excess food or
grease build-up.
• Ensure grill is not placed directly in the path of wind.
Be sure drip tray is clean (do not use aluminum foil on drip tray.)
Note: Some flare-ups may be inevitable if cooking greasy
foods.
Yellow Flames
• Check the burner inlet for obstructions, particularly at air inlets
for each burner.
•
Grill may be in an area that is too windy.
Flame blows out on low setting
or has uneven heat distribution.
• Check for spider webs or insect nest in venturi and clean
venturi.
• Cold grill needs to be preheated for 5 minutes on high setting.
• Venturi may be misaligned and needs to be lined up over
orifices.
• Cold and windy weather will require you to move grill away from
the wind.
•
Lack of fuel. Check to see cylinder valve is open and cylinder
has fuel.
Low heat with the knob on
“HIGH”
• Check to see if the fuel hose is bent or kinked.
• Make sure the grill area is clear of dust.
• Check your gas supply and gas pressure.
• If it is only one burner that appears low, make sure the orifice or
burner is clean.
Grill is Too Hot
• Excess grease build-up causing grease fires.
• Damaged or faulty regulator.
Replace with factory authorized parts.
•
Cook on a lower temperature setting.
Flame behind control panel or
control knob area.
IMMEDIATELY shut off cylinder valve and allow grill to cool.
•
C
heck for spider webs or insect nest in venturi and clean venturi.
• Gas is leaking from a faulty connection. Tighten connections
with an adjustable wrench and replace damaged parts. Perform
a leak test on all connections before cooking on grill again.
•
Venturi may be misaligned and needs to be lined up over orifice.
Fire at any connection. IMMEDIATELY shut off cylinder valve and allow grill to cool.
• Gas is leaking from a faulty connection. Tighten connections
with an adjustable wrench and replace damaged parts.
•
Perform a leak test on all connections before cooking on grill
again.