manualshive.com logo in svg

Fronius TransSteel 3500 Syn, Руководство по эксплуатации

Поделиться
Скачать
Fronius TransSteel 3500 Syn Скачать руководство пользователя страница 43

WARNING!

Danger from electrical current due to electrically conductive dust in the device.

This can result in serious injury and damage to property.

▶

Only operate the device with an air filter fitted. The air filter is a very import-
ant safety device for achieving IP 23 protection.

The venting duct is a very important safety device. When choosing the installa-
tion location, ensure that the cooling air can enter and exit unhindered through
the air ducts on the front and back of the device. Electroconductive metallic
dust (e.g. from grinding work) must not be allowed to get sucked into the device.

Mains connec-
tion

The devices are designed for the mains voltage specified on the rating plate. If
your version of the appliance does not come with mains cables and plugs ready-
fitted, these must be fitted in accordance with national regulations and stand-
ards. For details of fuse protection of the mains lead, please see the technical
data.

CAUTION!

Danger due to insufficiently dimensioned electrical installations.

This can result in damage to property.

▶

Dimension the mains lead and its fuse to suit the local power supply.
The technical data shown on the rating plate applies.

43

EN

Содержание TransSteel 3500 Syn

















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды