5
Soloclim
GB
General
The air conditioning unit Soloclim is the new solution
that represents a significant step towards reducing the
aesthetic impact of air conditioners. With a depth of just 16
centimetres, Soloclim is the most compact and least bulky of
the category. Its aesthetic impact is therefore minimal, both
inside and out.
Optimised Capacities
The conditioning capacities of Soloclim have been optimised
so as to obtain the right temperature for the best level of
comfort and, therefore, less consumption and less noise.
Thanks to the careful choice of sound insulation materials,
the noise is similar to that of a standard wall split unit and
consumption is drastically contained thanks to the new
direct current fan.
162 millimetre holes
An important choice not only for the design, but also for
a significant installation advantage: easier to find drilling
tools, no need for professional drills, even less aesthetic
encumbrance.
BLDC inverter technology
We have perfected the Inverter technology to offer the
best in terms of acoustic comfort (noise) and performance:
reduction of consumptions, maintenance of the best
temperature level and humidity level in the room.
Thanks to the use of the cutting edge BLDC (brushless
direct current) Inverter regulation, vibrations have been
completely eliminated and acoustic emissions have been
lowered to exceptional levels.
Both ventilation motors are BLDC to reduce consumption
still further and make flow adjustment more precise.
The packing is made of suitable material and carried out by
expert personnel. All units are checked and tested and are
delivered complete and in perfect conditions, however please
perform the following instructions to check the quality of
shipping services:
-
upon receipt, check if the box is damaged.If that is
the case, accept the goods with reservations and keep
photographic evidence of any damage found
-
unpack and check the contents against the packing list.
-
check that none of the parts have been damaged
during shipment.In case of damage, report it to the
shipping company within 3 days of receipt by registered
letter with return receipt and attaching photographic
documentation. A copy should also be sent by fax to the
MANUFACTURER. No notice of damage will be accepted
after 3 days from delivery.
Description
Storage
The energy consumption is extremely reduced thanks to
absorption values falling down under 300 W in the case
of partial load. At the nominal cooling power of 2.35 kW
Soloclim has an EER equal to 3.24 (10 HP) and 3.22 (12
HP) which allows an energy efficiency ratio of “A+” to be
obtained, this is the cutting edge in the sector of monobloc
climate control systems with fixed installation.
Easy to install
Soloclim can be installed on any perimeter wall either low or
high. Everything needed for installation (template, support
bracket, hole pipes and external grids), excluding the drill, is
included in the box.
Folding external grids
Soloclim is equipped with folding grids activated by inlet
and outlet air.They open when the unit is working and
close when it's turned off. Better indoor comfort, less dust,
noise and pollution, less maintenance and even less outdoor
visibility.
Remote control and touch-screen display
In addition to the remote control, the touch-screen display
on the unit enables the setting of any function.There's even a
"lock" mode to avoid any improper use. With a simple action
on the touch screen display, the "heating" function can be
deactivated: the appliance will then operate in "cooling" only,
without the need for the condensate discharge pipe. The
orientation of the air flaps can also be adjusted by simply
pressing one key.Receipt and unpacking
Keep the packing at least through the warranty
period, in case you need to ship the air-conditioner to
the service centre for repair. Dispose of the packing
materials in compliance with current regulations on
waste disposal.
Store the box in a closed environment protected from
atmospheric agents and isolate it from the floor using planks
or pallets.
Do not turn the carton upside down
