background image

11

Soloclim

GB

Installation

1

Bracket

2

Bracket anchoring points

3

Anti-lifting bracket

A

Junction line

B

Hook

C

Flap in vertical position

After checking that the bracket is anchored to the wall and 
that all necessary electrical connections and condensation 
drain predispositions have been made, you can mount the 
conditioner. Lift it by the sides of the bottom base until 
the bracket fits on all of the right spots on the appliance. 
In order to ease the operation, slightly tilt the appliance 
towards you. 
Direct electrical connections (disconnecting the power supply 
cable) and the anchoring of the condensation drain must be 

Once installation of the grilles is complete check their 
opening (towards the inside of the duct for the air inlet 
grid "IN" and towards the outside of the duct for the air 
outlet grid "OUT"). Remember that the grilles open when 
the external air flow is activated, to allow the cooling and 
heating functions to be operated. The conditioner must be 
activated for cooling or heating in order to test them. 

Mounting the appliance on the bracket 

carried out after having spaced the appliance from the wall 
using a wooden wedge or any other similar object.
Once the work is done, check that there are no openings on 
the back of the appliance, especially where the air ducts are 
connected. The machine can be secured to the wall with a 
dedicated anti-lifting bracket in order to improve installation 
safety,
this is located on the rear part of the machine. The drilling 
position is reported on the installation template.

Содержание Soloclim SC17




















Отзывы: