background image

8

Soloclim

GB

Installation

Before installing the conditioner, it is essential to calculate 
the summer thermal loads (and winter ones for the models 
with a heat pump) of the room. The more calculations 
are exact, the better the product will work. Please 
refer to current regulations to carry out calculations. 
For big installations please call a study specialised in 
thermotechnics. 

For a better performance of the appliance and to avoid 
malfunctions or dangerous situations, the location of the unit 
must meet the following requisites:

Respect the minimum distances indicated in the picture.

The wall on which you wish to anchor the unit must be 
robust and able to support its weight.

Leave enough space around the unit to perform 
maintenance operations.

Nothing must obstruct the air flow both in the top suction 
part (curtains, plants, furniture) and in the lower outlet 
part, as it could cause vibrations which might prevent the 
appliance from working correctly 

  The appliance must be installed against a wall 

communicating with the outside. 

  The appliance is declared to have a degree of protection 

IPX0, therefore it is not suitable for outdoor installation.  

Installation

Installation mode

Choosing the position of the unit

Try to reduce the thermal refrigeration load of the room 
following instructions below:

Cover large windows exposed to sunlight with curtains 
or with external maskings (blinds, porches, reflecting 
films, etc.).

The room must remain closed for as long as possible.

Avoid turning on halogen lamps or other high energy 
consumption appliances such as small ovens, steam 
irons, cooking plates etc. 

  Check that there are no structures or systems (beams, 

pillars, hydraulic pipes, electrical cables etc.) in the part 
that must be drilled. Check that nothing is placed in front 
of the holes thus obstructing the air flow (plants and 
leaves, panelling, shutters, thick grates or grids, etc.) 

  The unit shouldn't be installed in a position where the air 

flow aims directly at the people nearby;

  Do not force the air flap open;

  The appliance must not be installed directly above 

another electrical appliance (TV, radio, fridge, etc.) or 
above a source of heat.w

Содержание Soloclim SC17




















Отзывы: