manualshive.com logo in svg

Freescale Semiconductor MCF5329, Справочное руководство, Страница: 30 / 924

Поделиться
Скачать
Freescale Semiconductor MCF5329 Скачать руководство пользователя страница 30

xxx

Freescale Semiconductor

•

Chapter 2, “Signal Descriptions,”

 describes the device signals. It includes a listing of 

signals that characterizes each signal as an input or output, defines its state at reset, and 
identifies whether a pull-up resistor should be used.

•

Chapter 3, “ColdFire Core,”

 provides an overview of the microprocessor core. The chapter 

describes the organization of the Version 2 (V2) ColdFire processor core and an overview 
of the programming model as they are implemented on the device. 

•

Chapter 4, “Enhanced Multiply-Accumulate Unit (EMAC),”

 describes the 

multiply/accumulate unit, which executes integer multiply, multiply-accumulate, and 
miscellaneous register instructions. The EMAC is integrated into the operand execution 
pipeline (OEP). 

•

Chapter 5, “Cache,”

 describes the cache implementation, including organization, 

configuration, and coherency. It describes cache operations and how the cache interacts 
with other memory structures. 

•

Chapter 6, “Static RAM (SRAM),”

 describes the on-chip static RAM (SRAM) 

implementation. It covers general operations, configuration, and initialization. It also 
provides information and examples of how to minimize power consumption when using the 
SRAM. 

•

Chapter 7, “Clock Module,”

 describes the device’s different clocking methods. It also 

describes clock module operation in low power modes.

•

Chapter 8, “Power Management,”

 describes the low power operation of the device and 

peripheral behavior in low power modes.

•

Chapter 9, “Chip Configuration Module (CCM),”

 details the various operating 

configurations of the device. This chapter provides a description of signals used by the 
CCM and a programming model.

•

Chapter 10, “Reset Controller Module,”

 describes the operation of the reset controller 

module, detailing the different types of reset that can occur.

•

Chapter 11, “System Control Module (SCM),”

 describes the functionality of the SCM, 

which provides the programming model for peripheral access control, the software core 
watchdog timer (CWT), and the generic access error information.

•

Chapter 12, “Crossbar Switch (XBS),”

 details the interaction between bus masters and bus 

slaves within the device, including arbitration schemes.

•

Chapter 13, “General Purpose I/O Module

,” describes the operation and programming 

model of the general purpose I/O (GPIO) ports on the device.

•

Chapter 14, “Interrupt Controller Modules,”

 describes operation of the interrupt controller 

portion of the SCM. Includes descriptions of the registers in the interrupt controller 
memory map and the interrupt priority scheme.

•

Chapter 15, “Edge Port Module (EPORT),”

 describes EPORT module functionality, 

including operation in low power mode.

MCF5329 Reference Manual, Rev 3

Содержание MCF5329





























































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов