Freescale Semiconductor i.MX 6SoloLite Linux Скачать руководство пользователя

Страница: 182 / 199

<ltib_dir>/rpm/BUILD/linux/drivers/tty/serial.

Table 28-1. UART Driver Files

File

Description

imx.c

Low level driver

Table below shows the header files associated with the UART driver.

Table 28-2. UART Global Header Files

File

Description

<ltib_dir>/rpm/BUILD/linux/ arch/arm/plat-mxc/
include/mach/imx-uart.h

UART header that contains UART configuration data structure definitions

28.3 Configuration

This section discusses configuration options associated with Linux, chip configuration
options, and board configuration options.

28.3.1 Menu Configuration Options

To get to the Linux kernel configuration options provided for this module, use the ./ltib -c
command when located in the <ltib dir>. On the screen displayed, select Configure the

Kernel and exit. When the next screen appears, select the following options to enable this
module:

• CONFIG_SERIAL_IMX -Used for the UART driver for the UART ports. In

menuconfig, this option is available under

Device Drivers > Character devices > Serial drivers > IMX serial port support.

By default, this option is Y.

• CONFIG_SERIAL_IMX_CONSOLE-Chooses the Internal UART to bring up the

system console. This option is dependent on the CONFIG_SERIAL_IMX option. In
the menuconfig this option is available under

Device Drivers > Character devices > Serial drivers > IMX serial port support >
Console on IMX serial port

By default, this option is Y.

Configuration

i.MX 6SoloLite Linux Reference Manual, Rev. L3.0.35_4.1.0, 09/2013

182

Freescale Semiconductor, Inc.

Содержание i.MX 6SoloLite Linux








































































































































































































Результаты поиска

Содержание i.MX 6SoloLite Linux

Отзывы:

Похожие инструкции для i.MX 6SoloLite Linux

Бренды по названию

Популярные бренды

Freescale Semiconductor i.MX 6SoloLite Linux, Справочное руководство

Результаты поиска

Содержание i.MX 6SoloLite Linux

Отзывы:

Похожие инструкции для i.MX 6SoloLite Linux

Бренды по названию

Популярные бренды