manualshive.com logo in svg

Freescale Semiconductor i.MX 6SoloLite Linux, Справочное руководство

Поделиться
Скачать
Freescale Semiconductor i.MX 6SoloLite Linux Скачать руководство пользователя страница 80

9.1.1.5 API References

Refer to the following web sites for detailed specifications:

• EGL 1.4 API: 

http://www.khronos.org/egl/

• OpenVG 1.1 API: 

http://www.khronos.org/openvg/

9.1.1.6 Menu Configuration Options

The following Linux kernel configurations are provided for GPU driver:

CONFIG_MXC_GPU_VIV is a configuration option for GPU driver. In menucon
figuration this option is available under Device Drivers > MXC support drivers > MXC
Vivante GPU support > MXC Vivante GPU support.

To get to the GPU library package in LTIB, use the command ./ltib -c when located in the
<ltib dir>. On the displayed screen, select Configure the kernel, select Device Drivers >
MXC support drivers > MXC Vivante GPU support > MXC Vivante GPU support, and
then exit. When the next screen appears, select the following options to enable the GPU
driver:

• Package list > gpu-viv-bin-mx6q
• This package provides proprietary binary libraries, and test code built from the GPU

for framebuffer

Introduction

i.MX 6SoloLite Linux Reference Manual, Rev. L3.0.35_4.1.0, 09/2013

80

Freescale Semiconductor, Inc.

Содержание i.MX 6SoloLite Linux








































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды