Freescale Semiconductor i.MX 6SoloLite Linux Скачать руководство пользователя

Страница: 147 / 199

23.2.4 Programming Interface

This driver implements the functions required by the MMC bus protocol to interface with
the i.MX uSDHC module.

See the Linux document generated from build: make htmldocs.

23.2.5 Loadable Module Operations

The SDHCI driver can be built as loadable or builtin module.

1. How to build SDHCI driver as loadable module.

• CONFIG_MMC_SDHCI=m, it can be found at Device Drivers > MMC/SD Card

Support > Secure Digital Host Controller Interface support

• CONFIG_MMC_SDHCI_PLTFM=m, it can be found at Device Drivers >

MMC/SD Card Support > Secure Digital Host Controller Interface support >
SDHCI support on the platform specific bus.

• CONFIG_MMC_SDHCI_ESDHC_IMX=y, it can be found at Device Drivers >

MMC/SD Card Support > Secure Digital Host Controller Interface support >
SDHCI support on the platform specific bus > SDHCI platform support for the
Freescale eSDHC i.MX controller

2. How to load and unload SDHCI module.

Due to dependency, please load or unload the module following the module sequence
shown below.

run the following commands to load module:

• load modules via insmod command, assuming the files of sdhci.ko and sdhci-

platform.ko exist in current directory.

$> insmod sdhci.ko

$> insmod sdhci-platform.ko

• load modules via modprobe command, please make sure the files of sdhci.ko and

sdhci-platform.ko exist in corresponding kernel module lib directory.

$> modprobe sdhci.ko

$> modprobe sdhci-platform.ko

run the following commands to unload module.:

• unload modules via insmod command.

$> rmsmod sdhci-platform

$> rmsmod sdhci

• unload modules via modprobe command.

Chapter 23 MMC/SD/SDIO Host Driver

i.MX 6SoloLite Linux Reference Manual, Rev. L3.0.35_4.1.0, 09/2013

Freescale Semiconductor, Inc.

147

Содержание i.MX 6SoloLite Linux








































































































































































































Результаты поиска

Содержание i.MX 6SoloLite Linux

Отзывы:

Похожие инструкции для i.MX 6SoloLite Linux

Бренды по названию

Популярные бренды

Freescale Semiconductor i.MX 6SoloLite Linux, Справочное руководство

Результаты поиска

Содержание i.MX 6SoloLite Linux

Отзывы:

Похожие инструкции для i.MX 6SoloLite Linux

Бренды по названию

Популярные бренды