manualshive.com logo in svg

Freescale Semiconductor i.MX 6SoloLite Linux, Справочное руководство

Поделиться
Скачать
Freescale Semiconductor i.MX 6SoloLite Linux Скачать руководство пользователя страница 104

15.2.1 Driver Features

The PF100 regulator driver is based on PF100 core driver and regulator core driver. It
provides the following services for regulator control of the PMIC component:

• Switch ON/OFF all voltage regulators.
• Set the value for all voltage regulators.
• Get the current value for all voltage regulators.
• Write/Read PF100 registers by sysfs interface.

15.3 Software Operation

PF100 regulator client driver performs operations by reconfiguring the PMIC hardware
control registers.

This is done by calling PF100 core driver APIs with the required register settings.

Some of the PMIC power management operations depend on the system design and
configuration. For example, if the system is powered by a power source other than the
PMIC, then turning off or adjusting the PMIC voltage regulators has no effect.
Conversely, if the system is powered by the PMIC, any changes that use the power
management driver and the regulator client driver can affect the operation or stability of
the entire system.

15.3.1 Regulator APIs

The regulator power architecture is designed to provide a generic interface to voltage and
current regulators within the Linux kernel.

It is intended to provide voltage and current control to client or consumer drivers and to
provide status information to user space applications through a sysfs interface. The
intention is to allow systems to dynamically control regulator output to save power and
prolong battery life. This applies to both voltage regulators (where voltage output is
controllable) and current sinks (where current output is controllable).

For more details, visit 

http://opensource.wolfsonmicro.com/node/15

Under this framework, most power operations can be done by the following unified API
calls:

•

regulator_get

 is an unified API call to lookup and obtain a reference to a regulator:

Software Operation

i.MX 6SoloLite Linux Reference Manual, Rev. L3.0.35_4.1.0, 09/2013

104

Freescale Semiconductor, Inc.

Содержание i.MX 6SoloLite Linux








































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды