manualshive.com logo in svg

Freescale Semiconductor i.MX 6SoloLite Linux, Справочное руководство

Поделиться
Скачать
Freescale Semiconductor i.MX 6SoloLite Linux Скачать руководство пользователя страница 176

27.2.1 Software Operation

The FEC driver supports the following functions:

• Module initialization-Initializes the module with the device specific structure
• Rx/Tx transmition
• Interrupt servicing routine
• PHY management
• FEC management such init/start/stop
• i.MX 6 FEC module use little-endian format

27.2.2 Source Code Structure

Table below shows the source files.

They are available in the

<ltib_dir>/rpm/BUILD/linux/drivers/net directory.

Table 27-2. FEC Driver Files

File

Description

fec.h

Header file defining registers

fec.c

Linux driver for Ethernet LAN controller

For more information about the generic Linux driver, see the <ltib_dir>/rpm/BUILD/
linux/drivers/net/fec.c source file.

27.2.3 Menu Configuration Options

To get to the Linux kernel configuration option provided for this module, use the ./ltib -c
command when located in the <ltib dir>.

On the screen displayed, select Configure the Kernel and exit. When the next screen
appears, select the following option to enable this module:

• CONFIG_FEC is provided for this module. This option is available under:

• Device Drivers > Network device support > Ethernet (10, 100 or 1000 Mbit) >

FEC Ethernet controller.

• To mount NFS-rootfs through FEC, disable the other Network config in the

menuconfig if need.

Hardware Operation

i.MX 6SoloLite Linux Reference Manual, Rev. L3.0.35_4.1.0, 09/2013

176

Freescale Semiconductor, Inc.

Содержание i.MX 6SoloLite Linux








































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды