manualshive.com logo in svg

Freescale Semiconductor i.MX 6SoloLite Linux, Справочное руководство

Поделиться
Скачать
Freescale Semiconductor i.MX 6SoloLite Linux Скачать руководство пользователя страница 82

through the Linux Frame Buffer APIs. The following list demonstrates the software flow
to recognize a HDMI sink device and configure the ELCDIF FB driver to drive video
output:

1. The HDMI video driver receives a hotplug interrupt and reads the EDID from the

HDMI sink device constructing a list of video modes from the retrieved EDID
information. Using either the video mode string from the Linux kernel command line
(for the initial connection) or the most recent video mode (for a later HDMI cable
connection), the HDMI driver selects a video mode from the mode list that is the
closest match.

2. The HDMI video driver calls 

fb_set_var()

 to change the video mode in the ELCDIF

FB driver. The ELCDIF FB driver completes its reconfiguration for the new mode.

3. As a result of calling fb_set_var(), a FB notification is sent back to the HDMI driver

indicating that an FB_EVENT_MODE_CHANGE has occurred. The HDMI driver
configures the HDMI hardware for the new video mode.

4. Finally, the HDMI module is enabled to generate output to the HDMI sink device.

10.3 Source Code Structure

The bulk of the source code for the HDMI driver is divided amongst the three software
components that comprise the driver: the HDMI display driver, and the HDMI audio
driver.

The source code for the HDMI display driver is available in the <ltib_dir>/rpm/BUILD/
linux/drivers/video/mxc directory.

Table 10-1. HDMI Display Driver File List

File

Description

mxcfb_sii902x_elcdif.c

HDMI display driver implementation.

The source code for the HDMI audio driver is available in the <ltib_dir>/rpm/BUILD/
linux/drivers and sound/soc/ director. HDMI Audio data source comes from S/PDIF TX.

Table 10-2. HDMI Audio Driver File List

File

Description

sound/codecs/mxc_spdif.c

S/PDIF Audio SoC CODEC driver implementation.

sound/soc/imx/imx-spdif.c

S/PDIF Audio SoC Machine driver implementation.

sound/soc/imx/imx-spdif-dai.c

S/PDIF Audio SoC DAI driver implementation.

sound/soc/imx/imx-pcm-dma-mx2.c

S/PDIF Audio SoC platform layer driver implementation.

Source Code Structure

i.MX 6SoloLite Linux Reference Manual, Rev. L3.0.35_4.1.0, 09/2013

82

Freescale Semiconductor, Inc.

Содержание i.MX 6SoloLite Linux








































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды