13
13
13. Orient the Tower Frame (1) as shown, and set it
near the Connecting Frame (38).
Have a sec-
ond person hold the Tower Frame to prevent
it from falling until you complete step 14.
Remove the two M10 x 30mm Socket Screws
(30), the two M10 Washers (31), and the Pulley
Bracket (6) from the back of the Tower Frame
(1).
Next, remove all parts (24, 29, 31, and 32) from
the Pulley Bracket (6).
31
31
31
32
6
38
30
29
12. Attach the Seat (52) to the Main Frame (68)
with two M8 x 25mm Socket Screws (75), an
M8 x 55mm Socket Screw (107), and three M8
Washers (76).
12
107
75
76
76
52
68
1
24
