15
17
17. Loosen the two M8 x 35mm Set Screws (19) a
few complete turns;
it is not necessary to
remove the Set Screws.
Look under the top of the Tower Frame (1) and
remove the two 25mm Snap Rings (39) from
the two Weight Guide Bushings (18).
Lift the Weight Guide Bushings (18) until the
upper ends of the Weight Guides (7) are free.
Next, tip the upper ends of the Weight Guides
(7) forward or backward, and slide the two
25mm Snap Rings (39), the Drop-down Weight
(10), the two Upper Weight Bumpers (16), and
the Top Weight (9) upward off the Weight
Guides.
18
18. Look at the decals on the three 20-pound
Weights (8), and find the decal that has the
largest
number on it. Orient that 20-pound
Weight so that the decal is facing the
Connecting Frame (38), and slide the 20-pound
Weight onto the Weight Guides (7).
Repeat this step with the remaining 20-
pound Weights (8).
Then, repeat this step with the thirteen 10-
pound Weights (44).
10
16
9
39
19 18
18
19
38
7
7
44
8
Decals
1
