10
7
7. Loosen the two M6 x 15mm Socket Screws (90)
in the Axle Clamp (89) on the indicated end of
the Long Axle (59);
it is not necessary to
remove the Socket Screws.
Then, slide the
Axle Clamp and the Clamp Cover (91) off the
Long Axle.
Insert the end of the Long Axle (59) through the
Pivot Leg (93).
Slide the Axle Clamp (89) and the Clamp Cover
(91) onto the Long Axle (59). Then, tighten the
two M6 x 15mm Socket Screws (90).
Rotate the Clamp Cover (91) so that the open-
ing is facing the floor.
6
6. Attach a 25mm Snap Ring (39) to one end of
the Short Axle (80).
Have a second person hold the end of the Pivot
Leg (93) and two Plastic Washers (54) inside
the bracket on the Pivot Arm (83).
Pull the indi-
cated Adjustment Knob (99), and insert the
Large Adjustment Pin (104) into one of the
holes in the Pivot Leg Bracket (85).
Next, insert the Short Axle (80) through the
bracket on the Pivot Arm (83), through the
Plastic Washers (54), and through the Pivot Leg
(93).
Then, attach another 25mm Snap Ring (39) to
the Short Axle (80).
39 104
39
54
54
93
80
85
99
90
59
93
91
89
83
