12
11.
See the inset drawing.
Attach the Backrest
(62) to the Backrest Bracket (69) with two M8 x
25mm Socket Screws (75) and two M8
Washers (76).
Orient the Backrest Bracket (69) as shown.
Press the Latch (53), insert the Backrest
Bracket (69) into the Main Frame (68), and then
release the Latch.
Move the Backrest Bracket
forward and backward slightly to make sure
that the Latch is engaged in one of the
adjustment holes in the Backrest Bracket.
Then, tighten a Stop Screw (74) into the Main
Frame (68).
74
53
69
68
10.
Note: If the two Thigh Pads (56) are already
attached, go to step 11. If the Thigh Pads are
not attached, follow the instructions in this
step.
Attach a Thigh Pad (56) to one of the Large
Pad Plates (57) on the Thigh Pad Bracket (45)
with two M8 x 25mm Screws (77).
Attach the other Thigh Pad (56) in the same
way.
45
77
57
56
56
10
69
62
75
75
76
76
11
