14
14
14. Insert the Cable (40) through the Tower Frame
(1) as shown.
Attach the Connecting Frame (38) to the Tower
Frame (1) with four M10 x 35mm Socket
Screws (71) and four M10 Washers (31).
See step 1.
Tighten the four M10 x 35mm
Socket Screws (71).
See step 2.
Tighten the two M10 x 30mm
Socket Screws (30).
15
15. Route the Cable (40) upward through the Pulley
Bracket (6). Attach the Large Pulley (24) inside
the Pulley Bracket with the M10 x 50mm Socket
Bolt (29), the two M10 Washers (31), and the
M10 Locknut (32) that you removed in step 13.
Then, attach the Pulley Bracket (6) to the Tower
Frame (1) with the two M10 x 30mm Socket
Screws (30) and the two M10 Washers (31) that
you removed in step 13.
16
16. Identify the Rear Shroud Base (3), which has a
hole in the center, and the Front Shroud Base
(4). Orient the Shroud Bases as shown.
Insert the end of the Cable (40) upward through
the Rear Shroud Base (3).
Attach the Shroud Bases (3, 4) to the Tower
Frame (1) with four M6 x 15mm Screws (35)
and four M6 Washers (34).
40
31
1
38
31
71
71
4
1
3
40
34
34
35
31
31
31
32
6
9
30
24
40
29
35
