8
3
3. Attach the Handle Frame (82) to the Connecting
Frame (38) with four M8 x 15mm Screws (106)
and four M8 Washers (76).
Do not tighten the
Screws yet.
See the inset drawing.
Identify the Medium
Axle (78) (there is also a Short Axle [not
shown]). Attach a 25mm Snap Ring (39) to one
end of the Medium Axle.
See the inset drawing.
Insert a Plastic Washer
(54) between the Handle Frame (82) and the
Connecting Frame (38) as shown. Then, insert
the Medium Axle (78) through one side of the
bracket on the Connecting Frame, through the
Plastic Washer, and through the Handle Frame.
2. Attach the upper end of the Connecting Frame
(38) to the Main Frame (68) with two M10 x
30mm Socket Screws (30) and two M10
Washers (31).
Do not tighten the Socket
Screws yet.
38
68
31
2
106
76
76
82
38
82
54
38
39
30
78
