Franklin Q-link, Инструкция по установке, программированию, эксплуатации и обслуживанию

Страница: 64 / 125

64
Code
Modbus
Address
Full Parameter Name
OLED Display
Name
Parameter Setting Range
Adj.
During
Run
116 N/A Bluetooth MAC ID Bluetooth MAC ID Yes
128 N/A Bluetooth Name Bluetooth Name Yes
7.7 Fault Codes
Code
Full Parameter
Name
OLED Display
Name
Parameter Setting Range
Adj.
During
Run
1 Fault Fault 0 ‐ None
1 ‐ Motor Overload (C)
2 ‐ Motor Over Current (C)
4 ‐ VFD Over Heat (C)
8 ‐ Input Phase Open (L)
9 ‐ Output Phase Open (L)
10 ‐ No Motor (L)
11 ‐ Incorrect Output Wiring
12 ‐ Power Board Uncalibrated
13 ‐ Ground Fault (L)
21 ‐ Bypass Motor Overload (L)
26 ‐ Bypass Max Time (L)
27 ‐ Bypass Ground Fault (L)
28 ‐ Bypass Communications Error
29 ‐ Bypass Contactor (L)
30 ‐ Bypass Current at Power On
(L)
31 ‐ Bypass No Motor Current (L)
33 ‐ Bypass Unexpected Current
(L)
41 ‐ Limit Switch
42 ‐ Damper Overload (L)
43 ‐ Control Reserved
44 ‐ No Flow (L)
45 ‐ External Trip (M)
47 ‐ Control Board Error (M)
48 ‐ VFD Cooling Fan (L)
50 ‐ Overpressure (A)
51 ‐ BMS Communications Loss (A)
52 ‐ Analog Signal Loss
53 ‐ Transducer Signal Loss (A)
54 ‐ EEPROM Fail
55 ‐ Calibration CRC Failed
56 ‐ Bluetooth Key CRC Failed
N/A
4 Line U Current Line U Current 0.0 to 6xVFD FLA [A] N/A
5 Line V Current Line V Current 0.0 to 6xVFD FLA [A] N/A