Franklin Q-link, Инструкция по установке, программированию, эксплуатации и обслуживанию

Страница: 61 / 125

61
Code
Modbus
Address
Full
Parameter
Name
OLED
Display
Name
Parameter Setting Range
Adj.
During
Run
13 613 Fault Fault
0 ‐ None
1 ‐ Motor Overload (C)
2 ‐ Motor Over Current (C)
3 ‐ VFD Over Current (C)
4 ‐ VFD Over Heat (C)
5 ‐ VFD Short Circuit (C)
6 ‐ Over Voltage (L)
7 ‐ Under Voltage (L)
8 ‐ Input Phase Open (L)
9 ‐ Output Phase Open (L)
10 ‐ No Motor (L)
11 ‐ Incorrect Output Wiring
12 ‐ Power Board Uncalibrated
13 ‐ Ground Fault (L)
21 ‐ Bypass Motor Overload
22 ‐ Bypass Phase Unbalance
23 ‐ Bypass Phase Loss
24 ‐ Bypass Board Error
25 ‐ Bypass Stall
26 ‐ Bypass Max Time
27 ‐ Bypass Ground Fault
28 ‐ Bypass Communications Error
29 ‐ Bypass Contactor
30 ‐ Bypass Current At Power On
31 ‐ Bypass No Motor Current
32 ‐ Bypass Locked Rotor
33 ‐ Bypass Unexpected Current
34 ‐ Bypass No Motor Current
41 ‐ Limit Switch (H)
42 ‐ Damper Overload (L)
43 ‐ Control Reserved
45 ‐ External Trip (M)
46 ‐ Power Board Error (M)
47 ‐ Control Board Error (M)
48 ‐ VFD Cooling Fan (L)
49 ‐ Power Board Communications Error (M)
51 ‐ BMS Communications Loss (A)
52 ‐ Analog Signal Loss
53 ‐ Transducer Signal Loss (A)
54 ‐ EEPROM Error
55 ‐ Calibration CRC Failed
56 ‐ Bluetooth Key CRC Failed
57 ‐ Invalid Firmware
N/A