Franklin Fueling Systems EVO 600, Руководство по установке, Страница: 6 / 40

2
Operating precautions
FFS equipment is designed to be installed in areas where volatile liquids such as gasoline and
diesel fuel are present. Working in such a hazardous environment presents a risk of severe injury
or death if you do not follow standard industry practices and the instructions in this manual.
Before you work with or install the equipment covered in this manual, or any related equipment,
read this entire manual, particularly the following precautions:
IMPORTANT
: To help prevent spillage from an underground storage tank, make sure the delivery
equipment is well-maintained, that there is a proper connection, and that the fill adaptor is tight.
Delivery personnel should inspect delivery elbows and hoses for damage and missing parts.
CAUTION
: Use only original FFS parts. Substituting non-FFS parts could cause the device to
fail, which could create a hazardous condition and/or harm the environment.
WARNING
: Follow all codes that govern how you install and service this product and the
entire system. Always lock out and tag electrical circuit breakers while installing or servicing
this equipment and related equipment. A potentially lethal electrical shock hazard and the
possibility of an explosion or fire from a spark can result if the electrical circuit breakers are
accidentally turned on while you are installing or servicing this product. Refer to this manual (and
documentation for related equipment) for complete installation and safety information.
WARNING
: Before you enter a containment sump, check for the presence of hydrocarbon
vapors. Inhaling these vapors can make you dizzy or unconscious, and if ignited, they can explode
and cause serious injury or death. Containment sumps are designed to trap hazardous liquid
spills and prevent environmental contamination, so they can accumulate dangerous amounts
of hydrocarbon vapors. Check the atmosphere in the sump regularly while you are working in
it. If vapors reach unsafe levels, exit the sump and ventilate it with fresh air before you resume
working. Always have another person standing by for assistance.
WARNING
: Follow all federal, state, and local laws governing the installation of this product
and its associated systems. When no other regulations apply, follow NFPA codes 30, 30A, and 70
from the National Fire Protection Association. Failure to follow these codes could result in severe
injury, death, serious property damage, and/or environmental contamination.
WARNING
: Always secure the work area from moving vehicles. The equipment in this manual
is usually mounted underground, so reduced visibility puts service personnel working on it in
danger from moving vehicles that enter the work area. To help prevent this safety hazard, secure
the area by using a service truck (or some other vehicle) to block access to the work area.
WARNING
: All wiring must enter the console’s enclosure through the designated knockouts.
An explosion hazard may result if other openings are used. All wiring from probes to the console
must be run in conduit separate from all other wiring. Failure to do so will create an explosion
hazard.
DANGER
: Make sure you check the installation location for potential ignition sources such as
flames, sparks, radio waves, ionizing radiation, and ultrasound sonic waves. If you identify any
potential ignition sources, you must make sure safety measure are implemented.