Franklin Fueling Systems EVO 600 Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 40

Franklin Fueling Systems EVO 600 Скачать руководство пользователя страница 15

11

Non-Intrinsically Safe Wiring

WARNING

: Always lock out and tag electrical circuit breakers while installing or servicing

this equipment and any related equipment. A potentially lethal electrical shock hazard and the

possibility of an explosion or fire from a spark can result if the electrical circuit breakers are

accidentally turned on during installation or servicing.

IMPORTANT

: Non-intrinsically safe wiring cannot be run in the same conduit as intrinsically safe

wiring. Non-IS modules should always be installed to the left of the moveable isolation barrier.

Controller Module (CM)

The Controller Module (CM) is a non-IS module that acts like the brain of your console. The CM

handles all of the communication between the modules and then sends that information to your

output devices. You can use the optional touch screen LCD or external printer (depending on

model and configuration) as output devices to communicate with your system. The CM links to

the status lights on the front of the console and the LCD via a flexible cable connector.

Flexible cable connector

The flexible cable is installed at the factory and is just long enough to allow the door to fully

open. It is protected from high power wiring by the metal shroud attached to the CM.

NOTE

: The cable should not be deformed, but should be freely folded back into the shroud so

that it does not get pinched when the door is closed. If the flexible cable does become detached,

it can easily be reattached.

To reattach the flexible cable connector, identify the two sides of each end: there are metal bands

on one side and no metals bands on the other. It hooks into the CM by inserting one end of the

ribbon into the LCD connector with it’s metal bands facing to the left so that a metal-to-metal

connection is made with the LCD connector’s pins. After the ribbon has been correctly inserted

all of the way into the LCD connector so that the metals bands are no longer showing above the

connection, it should hold itself firmly in place. Once the flexible cable connector is properly

attached to the CM’s LCD connector, hook it up to the corresponding connector on the inside of

your console’s door by making the same kind of metal-to-metal connection that you made while

inserting it into the CM’s faceplate.

«
...
13
14
15
16
17
...
»

Содержание EVO 600









































Отзывы:

Нет отзывов