10
18
-15.
100
b-GB
.f
m
Changing the type of detection (only for on-wall washbasin battery installation)
Water flow should start/stop when a hand approaches/moves away from the
sensor (3-7 cm).
9.24
Press the "
–" key repeatedly until the minimum sensor range is reached.
• The LED in the sensor of the fitting flashes:
– 2 × long
9.25
Press the "
–" key again.
• The type of detection has been changed. The sensor only responds when a hand
approaches/moves away. The sensor range can be adjusted (see
Chapter 8.
).
• The LED in the sensor of the fitting flashes:
– 5 × long, 3 × short
The water flow should start/stop when a person approaches/moves away from
the sensor (>35 cm).
9.26
Press the "
+" key repeatedly until the maximum sensor range is reached.
• The LED in the sensor of the fitting flashes:
– 2 × long
9.27
Press the "
+" key again.
• The type of detection has been changed. The sensor only responds when a
person approaches/moves away. The sensor range can be adjusted
(see
Chapter 8.
).
• The LED in the sensor of the fitting flashes:
– 5 × long, 3 × short
Resetting the type of detection to the default factory setting
9.28
Press the RESET key.