6
18
-15.
100
b-GB
.f
m
Adjusting the extension of the flow duration/flushing time
8.5
Use the + and – (
) keys to adjust the extension of the flow duration in individual
steps.
• The LED in the sensor of the fitting flashes:
– 4 × short for each adjustment by one step
– 2 x long when the respective end setting is reached
Switching off the fitting
8.6
Press the
OFF key.
• The fitting is now permanently closed.
• The LED in the sensor of the fitting flashes:
– 3 × short, break, 3 × short, break, ...
8.7
Press the
OFF key again.
• The fitting is ready for operation.
9. Wash Fitting Settings
Setting for continual flow
A time of 3.5 min or 11 min can be set for continual flow (preset; 3.5 min).
9.1
Press the TEST key.
9.2
Press the
OFF key repeatedly until the required mode has been set.
• The time for the continual flow is set.
• The LED in the sensor of the fitting flashes:
– 2 × long = 11 min continual flow time
– 4 × short = 3.5 min continual flow time
9.3
Exit the adjustment mode.
• Press the TEST key.
or wait
• 60 s.
☞
This function is not available for products manufactured before 01/06/2003. Press
the corresponding keys to switch the fitting off.