4
18
-15.
100
b-GB
.f
m
5. User Interface
A: Range
B: Time
C: Functions:
On: Continuous operation mode
Off: Cleaning mode
D: Additional combination keys
E: LED
"Auto repeat" function
When the keys for setting the range and the extension of flow duration are
continually pressed, the command is sent again at regular intervals.
6. Switching the Mode
Both fittings operate with different baud rates. The remote control must be set on the
fitting before activation.
6.1
Press and hold the "Reset" key.
6.2
Press the "–" (
) key.
• Protronic-C
The LED in the remote control flashes twice slowly.
• Protronic-S
The LED in the remote control flashes 4 times slowly.
7. Activating the Fitting for Remote Control
☞
Perform the following with the remote activation before each adjustment:
• Washbasin fittings: Start the flow of water by approaching the sensor of the fitting.
• Urinal fittings: Place an object at the sensor for at least 5 s.
7.1
Direct the remote control (b) vertically towards the sensor (d) of the fitting at the
specified distance (a) and press a key.
☞
When the key is pressed properly, the LED (c) in the remote control flashes 2 times.
If the LED does not flash, this means either that the keys were not pressed properly
or that the battery in the remote control is empty (see
Chapter 12.
).