Frama Matrix F4 / F6
56
8.6.4. Dial Mode
Your Frama Matrix franking system supports two different methods of dialling telephone
numbers. In case of doubt, please read the documation on your telecommunication system.
Press “Dial Mode” to shift between the two possibilities.
Dial Mode TONE
(standard): The modem uses tone dialling for calling telephone numbers.
Dial Mode PULSE:
The modem uses pulse dialling for calling telephone numbers. This set-
ting is intended for not-so-new telephone systems.
8.6.5. Telephone numbers
Two different numbers are saved under the point “Telephone Numbers”. One of them is the
FramaOnline2 telephone number: 0091 11 45454848. Please note the double “00” at the be-
ginning of the number representing an international free-phone number.
You can delete the number by pressing CE. Enter the new telephone number using the 1-to-
10 numeric keypad and confirm your entry by pressing OK.
After entering the FramaOnline2 telephone number, you will see the hotline number of the
FramaOnline2 data centre. Proceed here in the same way.
8.6.6. Factory settings
By pressing “Factory Settings”, you reset all modem settings to the factory settings.
8.7. FramaOnline2 notes on connection problems
Connection interruption
This message appears if the connection between the FramaOnline2 data centre and your
franking system is suddenly interrupted. Try to make the connection again and repeat the
procedure.
No answer
The FramaOnline2 data centre doesn’t answer. Possible causes are a disconnected telephone
cable or an incomplete telephone number for the data centre. Many telephone systems in-
terpret an incomplete telephone number as an engaged signal. This is identified by your
Frama Matrix franking system and thus displayed. The telephone number is made up of the
exchange code for obtaining a free line (with telephone systems) and the data centre tele-
phone number.