Frama Matrix F4 / F6
14
1.5. Switching on franking system
Switch on the franking system. You will hear various sounds after
switching on. All motors and sensors are being checked.
Caution! After switching on, some time might pass until the
sytem is ready. During this time, the Frama franking system
will not accept any input from you.
Your next step is to put in and calibrate the inkjet cassette. This pro-
cess is absolutely essential to obtain frank marks of excellent quality
and it must therefore be carried out carefully.
2. Installing FramaOnline2
Loading your Frama Matrix franking system with new postage (credit) takes place through
the telephone line and a built-in analogous modem. Simultaneously, the postal rate infor-
mation is compared / adjusted. This process is convenient and gives you the assurance of
always having postage and the latest postal rates at your disposal.
In any event, you require your PIN for the administration mode.
Protect your PINs from misuse by keeping them in a safe place. If you forget or mislay your
PIN codes, they can be read out only in the Frama Central Workshop.
2.1. Activating / installing Frama Matrix on FramaOnline2 system
The following information in this chapter is given for reference only. Your Frama
franking system will be installed by a service engineer. Screens may differ as some
functions do not apply to India.
Check whether your Frama franking system is properly plugged into the telephone socket. If
necessary, read the chapter “Connection and start-up“ again. The franking system has to be
connected to the telephone socket only during the time until activation.
Fetching postage and communicating with FramaOnline2 are possible only in the administra-
tion mode. Caution! The administration mode is password (PIN) protected Use the PIN you
received in a separate letter.
We have preconfigured your Frama franking system to suit the most used telephone systems.
Sometimes though, it will be necessary for small changes to be made. The most frequent
setting will be the dialling code (official prefix for an outside line) to obtain the free line sig-
nal. Please refer to point 8.6.1 in this respect. In the as-delivered state, NO dialling code (offi-
cial prefix for an outside line) has been configured.