Frama Matrix F4 / F6
45
Acknowledge the security query. That’s all.
6.2. Cost centres and cost centre management in administration mode
Settings made in the administration mode always apply to all cost centres. In the administra-
tion mode, furthermore, you have access to all cost centres and can thus conveniently make
settings for these cost centres (counter readings, name and PIN).
You can also make settings in the respective cost centre. When doing so though,
not all functions of the administration mode are available to you.
6.2.1. Displaying cost centre data in administration mode
In the administration mode, you have access to all cost centres and can thus name, change or
issue new PINs as well as print out the counter readings for these and let them be displayed
as well as, of course, reset them.
Choose “Admin” in the cost centre selection.
Enter your PIN. Then, press the OK key to get
into the administration mode.
Press “i”.
You can have the counter readings of every
cost centre shown to you in this menu. In
this respect, you can fetch one cost centre or
a list of cost centres.
Select CC:
Press the key to fetch the cost
centre selection menu. Select the cost cen-
tre.